Replacement Nissan Key Fob
Nissan smart keys offer an additional layer of protection against theft through radio frequencies and advanced encryption. However, these systems are powered by an internal battery, which can eventually become weaker and will require replacement.
The procedure for replacing the battery in a key fob device is easy. Thankfully, the certified technicians and parts experts at Boch Nissan are ready to assist!
Battery
The Nissan key fob is a vital component. It allows you to unlock your doors as well as start your car and perform other functions. So when it stops working you'll probably want to know what the issue is. Luckily, you can fix it by replacing the battery.
You can purchase a brand-new CR2032 button cell battery from the hardware store or in a multipack at a discount supermarket chain for very little money. You'll also require a tiny screwdriver that you can use to open the back panel of your key fob. You can use a screwdriver for separating the two halves of many models. After you have opened the fob, remove the old battery, and then insert the new one, making sure it's oriented correctly.
Based on the model of your Nissan, you may need to confirm that the new battery is the correct one. This information is usually located in the owner's manual or on the backside of the key fob. After you've purchased the right battery, put it back in the fob, close the cover shut, and test it to confirm it's working. If you encounter issues, look up the helpful videos on YouTube to find a solution. If you need assistance, you can contact your Nissan dealer in Farmington Hills.
Programming
Modern Nissan automobiles come with keys that provide lots of added convenience and functions compared to the manual keys of old. Unfortunately, they may be more prone to battery problems and require replacement in the course of time. This is an easy fix you can perform at home.
The first step is to eliminate the battery that is in place. To do this, look for a small catch on the back of your key fob and pull it down. This will release the mechanical key stored in your key fob, which serves as an emergency starter. You'll want to keep this handy and return it after the replacement has been completed.
After you have removed the old battery, take note of the location and the way it was placed. You will need to use an screwdriver with a flat head to lift the battery. Replace it with the new one, ensuring that the plus side is facing downwards. Reassemble the outer case and test it to ensure that everything is functioning properly.
You should now be able to start your car by pressing any button on your key fob. You can also test it by pressing any button on your car's dashboard to determine if the fob is connected. If you are looking for answers or assistance with your Nissan vehicle, contact the service center at Boch Nissan South.
Locks
The Nissan Intelligent Key is designed to lock the car and open the trunk using a button click. If it isn't working even after a program and battery replacement it could be a different issue that needs to be addressed. In certain cases a fob that's damaged might require a replacement part or repairs to the circuit board to function normally. Damage can occur due to a variety of factors including water, blunt force, or scratches on the circuit board.
A professional can examine your Intelligent Key to determine if it's damaged and determine if it requires repairs or an upgrade. In some instances the issue can be repaired with a simple, inexpensive fix. For more serious issues the key may need to be replaced.
The process of replacing the battery in the key fob of your Nissan takes only a few seconds. However, this process involves touching delicate and sensitive electronics, so always wear a pair of gloves (preferably latex) or non-latex substitutes. You'll also need flathead drivers as well as an updated CR2032 battery.
Start by entering your vehicle, and making sure the doors are locked. Then press the unlock button on your key fob six to 10 times. After that take out and insert your ignition key, but don't turn it on to start the car. The hazard light will flash twice. This indicates that your Nissan is now in programming mode.
Keyless Entry
If you think your key fob is pretty boring, we have news for you that is more than lock and unlock your vehicle. Some modern fobs are able to roll down your windows, and even start your engine when you hold your key at the rear bumper.
Contrary to the traditional key that has only three or two locks, the latest systems are built on RFID technology. replacement nissan keys is equipped with an embedded microchip with a distinct frequency that communicates with the receiver inside your car and allows you to unlock the trunk and doors. The majority of models will recognize you as you drive up to the car using your key fob. It will then automatically unlock it.
Certain models let you open the trunk by waggling your key behind the car. This is very useful if you have a lot of luggage or groceries in your hands. The key fob comes with the button that allows you to start your car by pressing it onto the steering wheel. The system can also be activated by tapping the clutch or brake button when you press the START/STOP buttons.
The key fob might be dead if struggling to get into your Nissan to do errands in Troy or to go out on an evening. To fix this, flip your fob over and push the small release latch to the back. You've successfully programmed the replacement Nissan fob if both the unlock and lock light flashing.